LED panel light/ led light panel/ led ceiling panel light
TUV GS Listed LED Ceiling Light Panel 40W 120lm/W 2ft*2ft
1. Energy saving, high brightness, no infrared rays, no UV., environment friendly.
2. Instant start, no flicker, no buzz.
3. To use constant current driver.
4. Installation way: Recessed, surface mounted, suspended.
5. Dimmable function available for the led panel lights.
6. The driver fixed on back of out, which make the installation more convenient.
7. High efficiency (95%)constant current driver with built-in overheat protection that remain stable at a wide range of input voltages.
8. CE&RoHS, TUV, GS certificated.
A. Recessed installation
1. As the image-1, cut a hole with suitable size on the ceiling, and set the T-shape keel beam in advance(please refer to the products cut hole size table);
2. Make the lamp house installed in the hole, then connect the electric supply L, N electrodes to the related Led controllers' L, N.;
3. Set the lamp body steadily on the T-shape keel beam, turn on the power;
Attention: If your T-shape keel beam cannot be able to bear the lamp's weight or any other risks, please add the steel ropes to guarantee the installation's stable.
B. Surface mounted installation
1. As the image-2, set the steel ropes fixed on the ceiling.
2. Set the steel steel ropes connected to lamp house stability, then adjust the rope length to make the lamp house on horizontal position.
3. Connect the electric supply L, N electrodes to the related Led controllers' L, N.
4. Turn on the power
Attention: The led light source cannot to be replaced, please do not open the lamp body or unscrewed the screws among the LED light source, or the heating performance of the LED light source will be influenced, make the lifespan shorter, even the led burnt.
1. The lamp body cannot be able connected to the AC Commercial power directly, must via the led controller to supply.
2. According to the actual requirements, equip with the appropriate accessories, confirm the installation before put an order.
3. Cut off the power when you install or remove the light to protect exposed wiring.
4. Do not use organic solvents to clean the surface to prevent corrosion of plastic diffuser.
5. For good heat dissipation, suggest tearing up the protective film of the aluminum backboard after installation.
|TUV CE/GS Listed LED Panel Light 40W|
|Panel Size||Certification||Watt||Efficiency||Lumen||Color||Light Source|
|595*595*47mm||TUV CE/GS||40W||80lm/W||3200lm||3000K||42pcs smd3030+lens|
|619*619*47mm||TUV CE/GS||40W||80lm/W||3200lm||4000K||42pcs smd3030+lens|
|295*1195*47mm||TUV CE/GS||40W||80lm/W||3200lm||6000K||42pcs smd3030+lens|
|595*595*7.2mm||TUV CE/GS||40W||80lm/W||3200lm||3000K||120pcs smd2835|
|619*619*7.2mm||TUV CE/GS||40W||80lm/W||3200lm||4000K||120pcs smd2835|
|295*1195*7.2mm||TUV CE/GS||40W||80lm/W||3200lm||6000K||168pcs smd2835|
|595*595*11.1mm||TUV CE/GS||40W||100lm/W||4000lm||3000K||120pcs smd2835|
|619*619*11.1mm||TUV CE/GS||40W||100lm/W||4000lm||4000K||120pcs smd2835|
|295*1195*11.1mm||TUV CE/GS||40W||100lm/W||4000lm||6000K||168pcs smd2835|
|595*595*47mm||TUV CE/GS||40W||120lm/W||4800lm||3000K||480pcs smd2835|
|619*619*47mm||TUV CE/GS||40W||120lm/W||4800lm||4000K||480pcs smd2835|
|295*1195*47mm||TUV CE/GS||40W||120lm/W||4800lm||6000K||480pcs smd2835|